Timken Rodamientos Deslizantes
Timken Slide Bearings are made from a special formulation of PTFE that is re-informed with a glass fiber aggregate. This provides a structural material that has significant compressive strength without cold flow, yet retains the low friction and chemically inert characteristics of unfilled PTFE.Slide bearings facilitate precise linear motion and accommodate structural expansion. The slide bearing assembly consists of structural pads, a PTFE sliding surface (or other low-friction material) and slide bearing plates. Subtypes of slide bearings include linear ball bearings and linear roller bearings.
The SLIDE BEARING as differentiated from bridge bearings, elastomeric bearings, and other typical expansion bearings, transmits a vertical load from a supported structure to the sub-structure while providing for controlled horizontal movement. In its basic form, as shown below, it is not utilized as vibration dampener.
- Timken 20SBT32 Rodamientos Deslizantes
- 38,1
- 25,65
- Timken 200FSH320 Rodamientos Deslizantes
- 43 mm
- 80,5 kN
- Timken 5SBT80 Rodamientos Deslizantes
- 1 mm
- GEH110HCS
- Timken 22SBT36 Rodamientos Deslizantes
- 570 mm
- KOYO
- Timken 100FSH160 Rodamientos Deslizantes
- 65
- 660 kN
- Timken 80FSH130 Rodamientos Deslizantes
- 1.66
- 1000
- Timken 30SF48 Rodamientos Deslizantes
- 5500 r/min
- 30 mm
- Timken 60SBT96 Rodamientos Deslizantes
- 131.4 mm
- 3.937 Inch | 100 Mil
- Timken 40SFH72 Rodamientos Deslizantes
- NA4916
- 80x110x30
- 35 mm x 62 mm x 17 mm Timken GE35SX Rodamientos Deslizantes
- 23292 CW33
- 300 r/min
- Timken 35SFH60 Rodamientos Deslizantes
- CX566
- 5331